productDe

TJ3071 FFP1 NR

DESCRIPTION

Foldable design makes it easy to carry and use in daily life.

Built-in adjustable nose clip.

Unique folding design fits the face better and provides a better airtight seal.

Highly effective electrostatic filters for dust and oily particles in the air.

High level of protection with over 99% filtration.

Passes the European standard EN149:2001+A1:2009.

Specifications	Valved	Active Carbon	Package Contents
TJ3071 FFP1 NR	×	×	20pcs/box 20box/ctn

Details
Brands	Teji
Facepiece Type	Half Facepiece Disposable
Filter Material	Polypropylene
Executive standard	EN149: 2001+A1: 2009
Product Type	Disposable Respirator
Protection Level	FFP1 NR
Respirator Style	Folding Model

Product parameters	FFP1 NR
Inspiratory resistance (30LPM ± 1LPM)	0.6 mbar
Inspiratory resistance (95LPM±1LPM)	2.1 mbar
Expiratory resistance (160LPM±1LPM)	3.0 mbar
Total inward leakage*	25%/22%
Filtration efficiency (NaCl)	80%
Filtration efficiency (paraffin oil or DOP)	80%

The total inward leakage consists of three components: face seal leakage, exhalation valve leakage (if exhalation valve fitted) and filter penetration.

Application*		Performance level	level Important information
Sanding, Cutting, Drilling	Rust, Metal Particles, Filler	FFP1 NR
Allergies	Pollen, Animal dander	FFP1 NR
Warning: This guide is only an outline. It should not be used as the only means for selecting a respirator. Details regarding performance and limitations are set out on the respirator package and user instructions. Before using any of these respirators, the wearer must read and understand the user instructions for each product. Specific country legislation must be observed. Please note that the applications shown highlight some of the hazards which may be considered. Selection of the most appropriate respiratory protective equipment (RPE) will depend on the particular situation and should be made only by a competent person knowledgeable of the actual working conditions and the limitations of RPE.

Risk Assessment

Disposable particulate respirators only protect against solid and liquid particles including micro-organisms. They do not protect against gases or vapors such as solvent vapor.

Disposable particulate respirators are available in FFP1 NR, FFP2 NR or FFP3 NR according to EN149:2001+A1:2009, with FFP3 NR providing the highest level of protection.

Disposable respirators are for single use and should be disposed after use. Ongoing maintenance is not required.

Some factors that affect respirator selection

When choosing particulate respirators consider the following factors.

Worker

Users who do not follow the wearing instructions may incur unnecessary health risks.

Face shape and size will influence the size and model of respirator appropriate for each wearer. One type and size will not suit everyone so carry out a fit test for every worker.

Facial hair can prevent some types of respirators from sealing properly.

Pre-existing medical conditions of the wearer may restrict or prevent the wearing of a respirator for example, chronic lung diseases such as asthma.

Psychological considerations such as possible claustrophobia and anxiety.

Work task

How long the respirator will be worn and the physical demands of the task for example, wearing unpowered RPE for more than an hour or during hard physical work may become uncomfortable and result in a person removing the respirator while still in a contaminated area.

Other risks from the work task for example, a half-face disposable respirator with an exhalation valve may not be appropriate where there is a risk of splashes.

What other PPE will be worn for example, some safety glasses may interfere with the fit of the respirator.

Vision and communication requirements.